What size supply hose and how many feet does your engines carry

We carry 1600' of 5" Angus supply hose on the engines.

Views: 3426

▶ Reply to This

Replies to This Discussion

Permalink Reply by Tony P on August 2, 2009 at 7:30pm
Supply hose? Our pumper has 14 lengths of 64mm (2.5 inch) - each length being a nominal 30 metres (about 100 feet). So about 420 metres (1400 feet). These are used for feed lines from hydrants and too other pumpers, and as attack lines if we see any need for other than our normal 38 mm (1.5 inch) attack lines. That amount of hose fits nearly all of our needs, if we need for a greater volume of water, or have a greater than normal distance from a hydrant, we call for a hose-layer that carries about 3 kilometres of 90 metre hose.
Permalink Reply by Andrew Dalgarno on August 2, 2009 at 7:49pm
Yup, all we carry is 1.5" and 2.5" as well. Being rural, we have no hydrants. We either call in tankers through mutual aid or draft out of standing water supplies. We carry 30 feet of hard suction for drafting and have about 1100-1200 feet of 2.5" to supply water to the pumper. 800 feet of 1.5" for attack.

Andrew
Permalink Reply by LVVFD622 on August 2, 2009 at 8:03pm
We have 4" L.D.H. here and we carry about 1000' on Engine 1, 1000' on Tanker 5, and about 1000' (I think) of 3" on Ladder 6. Our Mini-Pumper also carries 4" but I am not sure of the exact amount. We also have about 200' reverse lay 2.5" on the Engine as well.
Permalink Reply by Doug on August 2, 2009 at 8:22pm
1,000' of 4" on our Engine, 500' of 4" on our Ladder, all in 50' sections. We also carry one 25' and one 50' spare rolls on each rig in a compartment.
Permalink Reply by luis campos on August 7, 2009 at 11:34pm
1000ft of 5 inch hose for supply
400ft of 2 1/2 inch for leader line
2qty 1 /3/4inch for speedlays 150ft and 200ft
100ft 1 3/4 inch trash line
Permalink Reply by Nate Williams on August 7, 2009 at 11:49pm
we carry 800ft if 5" on engine 1 and 600 ft on truck 7. we also have about 400 ft at the station.
Permalink Reply by Michael J Burke on August 8, 2009 at 6:32pm
We carry about 1700 feet of 4" hose on our engine 1 and about 1500' of 4" pn our engine 3. Ladder has one 30' snake of 4" for the pipe only.
Permalink Reply by ken mackey on August 8, 2009 at 7:48pm
We carry 1000' of 5" w/Storz couplings,100' lengths, and 500' of 3"hose w/2 1/2" couplings,50' lengths, on each of our 3 pumpers. The tower carries 500' of 5".
Permalink Reply by Todd on August 8, 2009 at 8:25pm
1200' 5" and 500' 3" hose on our engine

700' 5" hose on our Quint
Permalink Reply by the Happy Medic on August 8, 2009 at 9:14pm
Average is 1600' of 3" and Hose Tenders carry 2500' of 4".
Permalink Reply by Asst. Chief Bigshow on August 22, 2009 at 11:42am
On our biggest truck we carry 1600' of 2.5 and 500' of 1.5
Permalink Reply by sully on August 22, 2009 at 12:12pm
The fire department i am on, we use the common 5" rubber supply hose,1,000 and we also carry 3" supply hose too, and that is 1,000 foot of that too. we also use it as a attack line too. but it takes 3 or 4 firefighter to move tha t heavy hose around.

▶ Reply to Discussion

RSS

FireRescue Magazine

Find Members Fast


Or Name, Dept, Keyword
• Invite Your Friends
• Not a Member? Join Now

© 2024   Created by Firefighter Nation WebChief.   Powered by

Badges  |  Contact Firefighter Nation  |  Terms of Service