We have several parks and schools in our district, and we started using the playground equipment as a training tool. The bigger the better.

We'll find a starting point and anchor about 200' of utility rope to it. Then we run the rope all throughout the equipment. Up a slide, down a slide, around objects and under them. This is only limited by your imagination and the size of the playground.

Try to find things that you can run the rope under that will require the member to don and doff their airpack. Also - alot of playgrounds have the little areas that are like some type of room or something with an opening that simulates a window. Run the rope through there.

Cover the masks of the members (use Glad "press-n-Seal" over the mask - it works the best) and send them through the playground, following the rope.

You'll be surprised that no matter how long they stand around and watch you string the rope through, they still get turned around or run into problems.

The other great thing is that when you go back another time to do it again, you run the rope through a different way and it's an entirely different drill.

I'll caution you on one thing though - We ran one that had about a 4' drop on it. It's not a long fall, and the members liked it because it really tested them, but you don't want anyone to get hurt so if you encounter something like this use a spotter or two.

Give it a try. It's easy and it works.

Have fun with it, and Stay Safe Brothers and Sisters.

Views: 416

Replies to This Discussion

The Glad "press -n- seal", it doesn't mark up the face piece? and what kind of SCBA's do you use?
We use Draeger. How would Glad press-n-seal mark up a face piece? It's basically a form of seran wrap... I've never had any problems with it. You stick it on and it peels right off. Try it and see.
Yes, I tried it and it's great. this drill is nice and simple. Thanks for the tip. By the way the press and seal is pretty effective to.
I love this idea, thanks for the tip
Right on. Have fun and let me know what you think...
I didn't know that the press and seal came in anything but clear. Is the a particular color you use or prefer? Talk about a cheap training tool. I like that.

We have actually done the playground before, but the rope would be a different idea. The newer playgrounds make a dynamic maze. And imagination only increases the potential. We have used the swinging bridges to simulate soft floors. Pushing on it with a tool or a limb and it gives a bit. any member who just went out on the bridge without checking we pulled out and had them start over, after a couple of tries the guys got the idea to check ahead of them.
Actually the press-n-seal is kind of a grayish color. It's not really clear. One layer will obscure the vision through the mask, but we use two.
Ok I will have our guys give it a try.
I did this same drill about 15 years ago,its the best training for SCBA Confidence. If I can find the pic's of it I will post them.
What about using a doubled up sheet of small bubblewrap? That is what my 240 class is having us use, and believe me, it works. Just a thought. Then nothing goes on your mask at all.
Brittany
p.s... you can also do donning drills with that in as well, it is great fun!
This is a great idea I might try this in my department. It sounds fun
We did this drill the other day. The guys loved it. I wish I had more rope though, I would have liked to make it a little longer. And going through the tight spots turned up one guy who got closterphobic. Rather find out there.

RSS

Find Members Fast


Or Name, Dept, Keyword
Invite Your Friends
Not a Member? Join Now

© 2024   Created by Firefighter Nation WebChief.   Powered by

Badges  |  Contact Firefighter Nation  |  Terms of Service