Where and How Do You Store Your Blower, Extinguishers & K-12?

To safely store our K-12's (circular saw), and leaving room for our blower and fire extinguishers... we ended up fabricating an angled metal storage device for the rear compartment of all of our Type I Engines, which are all KME's and is shown above. We had to make our own, how do you do it?

0 members like this

▶ Reply to This

Replies to This Discussion

Permalink Reply by Timothy John Dodson on February 14, 2013 at 4:46pm

Our saw, PPV, and extinguishers are all in separate compartments.

▶ Reply

Permalink Reply by lutan1 on February 14, 2013 at 8:08pm

I've never heard of Halligans being banned? Or fans? WTF?

▶ Reply

Permalink Reply by Chris Moyer on February 15, 2013 at 12:15pm

Our PPv fan , smoke ejector and water can are in our drivers side front compartment. And our saws K12 and vent saw is stored in the drivers side rear compartment( these saws are mounted on a slide out tray).

▶ Reply

Permalink Reply by Roy Walker on February 16, 2013 at 11:59pm

C.B we store our blower the the same way as yours except the saw is stored in an adjacent compartment. The saw is in a large metal box along with gas,spare blades and tools. In it's place in the blower compartment we keep two foam/water extinguishers,plus a gas canister. Two purple k extinguishers are stored exactly like yours.

▶ Reply

Permalink Reply by Josh Chambers on February 17, 2013 at 9:07pm

This picture is before we had any equipment on our new engine, it is looking into the rear compartment from the drivers side. We have a 20lb. dry chem and a 2 1/2 water extinguisher mounted up against the front wall of the compartment. Our vent saw is mounted on the floor next to the extinguishers. The PPV fan is on the other side at the front wall of the rear compartment. Our Smoke Ejectors are mounted in our 2nd due engine.