Paul Hasenmeier's Blog – March 2012 Archive (8)

Auger Extrication Prop

All the pieces came together for this auger extrication prop.  I originally saw the idea on Brotherhood Instructors page, check it out here.

Firefighter Josh Goetz (Carroll Township FD) was…

Continue

Added by Paul Hasenmeier on March 29, 2012 at 4:04pm — No Comments

Electric Meters - To Pull or Not To Pull

A commenter on my post, Window Cut Down – Company Drill added a good point to the discussion about ensuring the power is cut before running a saw down the wall.  Read on.  

Pass it on!

Added by Paul Hasenmeier on March 26, 2012 at 10:07pm — No Comments

Window Cut-Down - Company Drill

The picture to the left is from a fire the other night in a two story 1,500 square feet residential joint.  It had a gable roof and the second floor was made into one room with knee walls on both B and D walls.  The window seen here was to the first floor bathroom.

For this company drill tabletop session or hands-on training, talk about and/or make a window cut down for rescue.  If we need to open up this window and save our own or get a victim out, how would we do it?  Saws?…

Continue

Added by Paul Hasenmeier on March 22, 2012 at 2:27pm — No Comments

Hose Connection Exiting - Company Drill

Here’s a simple, yet important drill on orientation with the hoseline.  Lt. Jason Deptula from Vermilion Twp. FD sent the write up over.

As we are all taught in our firefighter classes, the female connection on a hose connects to the make end of the next section.  Using the progression of female to male can lead us out of a building or “smooth bump bump to the pump”. Read…

Continue

Added by Paul Hasenmeier on March 18, 2012 at 8:34pm — No Comments

Acquired Structure Training Burns

This past week my latest article was published on acquired structure training burns.  Read it here.  In the article I referenced two resources which I have posted here.  

Pass it on!

Added by Paul Hasenmeier on March 16, 2012 at 11:01pm — No Comments

Water Supply Issue?

Norwalk firefighter Charlie Hillman sent me this picture of some significant calcification in an old ductile iron main.  Think about the following questions:

  • How does this effect our water supply?
  • Besides the water department having a break in the line or a customer noticing a decrease in water, how can we discover this problem?
  • Does the calcification increase or decrease pressure to hydrants?
  • My guess is this is a 16″ main that is decreased down to…
Continue

Added by Paul Hasenmeier on March 6, 2012 at 10:46pm — No Comments

Tanker Fill Procedure - Company Drill

To start the evolution, the apparatus moves 200 feet to location B.  The tanker is filled from a fill site engine.  When the water tank is full to overflow, the fill line(s) are disconnected (ensure all firefighters are seat belted in prior to moving apparatus), and the tanker moves 200 feet and stops (document your total time for later use with ISO).  Read…

Continue

Added by Paul Hasenmeier on March 6, 2012 at 9:25pm — No Comments

Tanker Discharge Procedure - Company Drill

Here’s another moving water drill.  If you missed the portable pond set-up drill, click here.  Move the water as you would in a water shuttle operation.  (Record and document times for later use with ISO).…

Continue

Added by Paul Hasenmeier on March 1, 2012 at 10:39pm — No Comments

Find Members Fast


Or Name, Dept, Keyword
Invite Your Friends
Not a Member? Join Now

© 2024   Created by Firefighter Nation WebChief.   Powered by

Badges  |  Contact Firefighter Nation  |  Terms of Service