Its real easy to make. take 4 sheets of plywood and and make a square box with them about two foot square you can usually do it with 2 sheets, support it
with studs and then if u want to you can set up like going through a wall at the end with the studs. Put holes in the sides and top of the box criss
crosing them and doing anything to entangle them. For example: Use rope, extinion cord, take a dryer vent and brake it apart use the wire to run it
through there, get different sizes of wire and run everything through there. Tie a strong knot at the end of each of them outside of the box to maek sure
they dont go anywhere.
The other box is almost as easy to make. Same principle as the last but its more tightabout the same length, make 2 boxes and seal 1 end on each of them.
Make a rounded cut into the top of 1 piece and the bottom of the other with an 16 in across. Be sure to put a 2x4 frame inbetween the holes it makes it
somewhat easier to make it through. Line your holes up brace tand hen and make strong legs for your top pience (strong legs). Then watch your brothers have
fun going through it in full PPE and blindfolded in what we like to call the CUSS BOX. hidden features: put everything on wheels and it will move better
in your bays. If you can find somebody than make it through there without having to take off there SCBA let me know, just dont let them take off there
regulator. tips:when they get to the whole they will have to take off there scba puss it up through the hole and will not be able to put it back on. Take
some pictures of the finished product send them to me and let me know how it works.
I got my basic license in 00 so it might have been when I rode for EMT school. I was thinking for some reason I already worked there but I didn't start working there until 01 or so. Memory is kinda shady that far back.
Wow I remember you. You worked there when I was there. I worked for the squad. It has been so long since I have been up there so I don't know who all still works there now.
Comment Wall (13 comments)
You need to be a member of My Firefighter Nation to add comments!
Join My Firefighter Nation
with studs and then if u want to you can set up like going through a wall at the end with the studs. Put holes in the sides and top of the box criss
crosing them and doing anything to entangle them. For example: Use rope, extinion cord, take a dryer vent and brake it apart use the wire to run it
through there, get different sizes of wire and run everything through there. Tie a strong knot at the end of each of them outside of the box to maek sure
they dont go anywhere.
The other box is almost as easy to make. Same principle as the last but its more tightabout the same length, make 2 boxes and seal 1 end on each of them.
Make a rounded cut into the top of 1 piece and the bottom of the other with an 16 in across. Be sure to put a 2x4 frame inbetween the holes it makes it
somewhat easier to make it through. Line your holes up brace tand hen and make strong legs for your top pience (strong legs). Then watch your brothers have
fun going through it in full PPE and blindfolded in what we like to call the CUSS BOX. hidden features: put everything on wheels and it will move better
in your bays. If you can find somebody than make it through there without having to take off there SCBA let me know, just dont let them take off there
regulator. tips:when they get to the whole they will have to take off there scba puss it up through the hole and will not be able to put it back on. Take
some pictures of the finished product send them to me and let me know how it works.
View All Comments