I remember stowing my Ruger 44 Mag Carbine away last year - bumped it on the safe door. No scratch or visual damage - so I put her to rest.
I went to the gun range to do some practice and guess what - the scope position/aim point changed ! :)
I spent some time re-adjusting it but , it seemed to wonder a little. I took it home , broke it down(Field stripped) and checked for fouling in the barrel - all looked good.
Put the rifle in a vise (rubber padded) and started to remove the scope - I was thinking maybe the scope needed to go back to the manufacture. Well, I found the front base (Two piece bases) had losened - I removed the screws and found no "Lock-tite" on them - also the wholes were completely through the top of the reciever metal.
I cleaned all the threads with finger nail polish remover - applied "Lock-tite" and re-assembled. I took it to the range - 5 bulletts later we were back on paper.

Wether its bow, hand gun, shotgun or rifle - re-check your sight systems - its always a good excuse to get out and practice !

Good Luck
Stay Safe

Views: 62

Replies to This Discussion

Good Point Rick. I wish I had 5 bucks for everytime my sights were screwed up on my CVA 50 cal. The front site has fallen out 3 times, and the rear sights move too freely. I got a scope just need to get used to it and sight it in.
Can't hunt without a scope any more! CVA 50 - if you can see it - you should own it.

I used to have a Modern Knight - I loved how smooth and accurate it was. Everyone has their favorite .

I was lucky , I was raised in a hunting/sport shooting family. My uncle taught me at the age of six how to shoot a tiny single shot 22 short rifle . He was xmilitary, so everything was by the numbers. You didnt get to use it until you learned it and earned it.

Good Luck
Stay Safe

RSS

Find Members Fast


Or Name, Dept, Keyword
Invite Your Friends
Not a Member? Join Now

© 2024   Created by Firefighter Nation WebChief.   Powered by

Badges  |  Contact Firefighter Nation  |  Terms of Service