preplanning

Hi,
I'm a Belgian Firefighter officer and whants to optimize our preplan. So I'm searching for templates en 'good practices: how to make a preplan'.

How do you do that at your fire department, or do you have links where I can find that.

Views: 646

▶ Reply to This

Replies to This Discussion

Permalink Reply by John on February 5, 2009 at 1:51pm
We are working on that at our Dept. as well
Permalink Reply by Mike on February 5, 2009 at 2:08pm
Bert If you pm me and leave your email I will send you what I use. I do all the pre-fire plans for our dept. We use Fire Zone Cad www.cadzone.com
Permalink Reply by Bert Michielsen on February 6, 2009 at 8:24am
Mike,

I don't know how to pm. So here is my emailadres: bert.michielsen@brandweervlaanderen.be

Thanks!

Bert
Permalink Reply by Mike on February 6, 2009 at 4:23pm
Bert, I emailed you
Let me know if you get it and if y have any ?'s It is based off of NFPA 1620 (Pre-Planing)
Permalink Reply by Bert Michielsen on February 7, 2009 at 3:42am
I have the NFPA 1620 edition from 1998. Is that the latest?
Permalink Reply by Andy Marsh on February 7, 2009 at 6:16am
Take a look at this one. You can adapt it to your own company. Much thanks to Deputy Chief Millay of the Llanerch Fire Company, Haverford Township Bureau of Fire (Pa) He posted this on FirefighterCloseCalls.com. Thanks also to Chief Billy G. for putting there!

http://www.firefighterclosecalls.com/downloads/PreplanWorksheet.doc
Permalink Reply by Bert Michielsen on February 7, 2009 at 8:14am
Thank you for the intresting link. Do you know what the Pre-Plan Diagram means? (At the last page of the document).
Permalink Reply by Andy Marsh on February 9, 2009 at 2:01am
Bert,
I'm not sure what the intent was for that particluar department was for that page. You may want to contact that dept. However, you could use that to have a drawing of a bldg. with highlighted areas of concerns or you may want to place pictures of the bldg.
Permalink Reply by Greg Jakubowski on July 29, 2010 at 8:46am
I am a bit biased, but we use BLAZEMARK, www.getblazemark.com Internet-based, so no need to have to run from station to station with disks or flash drives. As soon as information is updated, everyone has the latest info. Since it is web-based, any web-based resource, including traffic and webcams can be embedded right in the preplan.
Permalink Reply by Greg Jakubowski on July 29, 2010 at 8:49am
NFPA 1620 is now a standard as of 2010

▶ Reply to Discussion

RSS

FireRescue Magazine

Find Members Fast


Or Name, Dept, Keyword
• Invite Your Friends
• Not a Member? Join Now

© 2024   Created by Firefighter Nation WebChief.   Powered by

Badges  |  Contact Firefighter Nation  |  Terms of Service