Replies to This Discussion

Permalink Reply by Alan Shaw on October 22, 2009 at 1:51pm

We use Firehouse Software. We report both fire and EMS calls on it, but only use the fire reporting part of it. The EMS part is set up to do full ACR's which we (as first responders) don't need to do.

We also use this program to log training and departmental meetings & events.

• ▶ Reply

Permalink Reply by George A. Laiacona III on October 22, 2009 at 2:57pm

Couchton Fire and Rescue uses Fire Programs by Arrakis Software.

• ▶ Reply

Permalink Reply by Oldman on October 22, 2009 at 5:19pm

We've used Firehouse for the last 10 years.

• ▶ Reply

Permalink Reply by Doug on October 22, 2009 at 6:55pm

Firehouse.

• ▶ Reply

Permalink Reply by John Crabbe on October 23, 2009 at 1:16am

We have used FireRMS in the past and have just recently switched to ImageTrend, which so far has been a much better system, especially for EMS reports.
We now have a toughbook on each ambulance and can put the info in that, print off a copy for the ER and can have a narrative in by the time we get back to the station. The toughbooks also have a repeat patient feature so we can put a portion of the pt's last name in and it will show if we picked them up before and should have their meds and history already in. Works well so far.

• ▶ Reply

Permalink Reply by Mark Horwich on April 15, 2011 at 8:17am

Check out www.firestationsoftware.com for all your recod keeping needs for your department. It is way more affordable than Firehouse and geared towards smaller, volunteer departments.

• ▶ Reply

▶ Reply to Discussion