Chevrons on the rear of apparatus, your thoughts?

The 2009 version of NFPA 1901is going to mandate chevrons on the rear of apparatus, like they do in Europe. I think it's a great idea who's time has finally come. I'm sure many FF's and civilian's lives will be saved by this. We need to be visible out there. Some F.D's have been doing this for a while, (see the JPG below). What do you think?

Views: 1810

Attachments:

▶ Reply to This

Replies to This Discussion

Permalink Reply by Ben Waller on March 31, 2009 at 9:58pm
Just curious...does your department wear those ridiculous, almost useless SCBAs, or those ridiculous, almost useless flash hoods, or ride in those ridiculous, almost useless enclosed cabs instead of on the tailboard?

I heard the same kind of complaint about SCBAs, flash hoods, and enclosed cabs as I hear about the hi-viz chevrons on the apparatus.

I guess it's too much to ask if your firefighters wear those ridiculous, almost useless seat belts when responding or returning.
Permalink Reply by tom on March 31, 2009 at 10:07pm
Well i think it the best thing they could have done for the safety of firefighter and other people driving on the road finaly something that was done smart
Permalink Reply by Mick Mayers on March 31, 2009 at 10:15pm
We liked them so much we have them on the front as well. But before you go dissing them, why don't you see how well they work...


And this is what it looks like at night:


And of course, this is the rear:

Permalink Reply by Sarah Turner on April 1, 2009 at 3:49pm
LOL. Point made.
Permalink Reply by John Rulli Jr. on April 1, 2009 at 3:59pm
I can't believe people think chevrons are a bad/stupid idea. I'm for anything thats going to make our job safer.
Permalink Reply by Oldman on April 1, 2009 at 4:17pm
Wonder if this works better?
Attachments:
Permalink Reply by k hig on April 1, 2009 at 4:23pm
Grand job, well done for you. Now if you would go stand over there and take your previous statements with you because clearly you are not tuned in on the same frequency as me when it comes to keeping your apparatus or crew safe. When I say stand over there meaning anywhere but near me! Only joshing by this comment, opinions are like ass holes- everyone has got one :)
Permalink Reply by k hig on April 1, 2009 at 4:27pm

In the UK and Ireland this is also on our Appliances :)
Permalink Reply by Oldman on April 1, 2009 at 4:30pm
There you go! Now if they could only be made florescent in the daytime, and glow at night, it'd all be good. And hey!!! The truck is red!!
Permalink Reply by k hig on April 1, 2009 at 4:33pm
Some are! I have a good site for you.Take a look - www.blues-twos.com
Permalink Reply by Oldman on April 1, 2009 at 4:42pm
Ok, so the question is, have you seen a difference in driver reaction vs those appliances which have just reflective striping? Like the website BTW.
Permalink Reply by k hig on April 1, 2009 at 4:59pm
Yes, the ones with reflective striping are very common and are the older version of the box print. The box prints defiantly increases the appliances visibility from afar and also close up, along with the chevrons it is highly effective and productive. You still have to remember there is still going to be accidents no matter what is done!

▶ Reply to Discussion

RSS

FireRescue Magazine

Find Members Fast


Or Name, Dept, Keyword
• Invite Your Friends
• Not a Member? Join Now

© 2024   Created by Firefighter Nation WebChief.   Powered by

Badges  |  Contact Firefighter Nation  |  Terms of Service