This past Fall we were doing a Survival class and one of the drills we do is the “following the coupling” drill. It is one of the most basic of drills and is well known throughout the fire service. We have posted on this drill before on using a cut piece of hose to hand to your firefighters and have them tell you which way would be back to the truck.

We get comment about how basic this drill this and some like to try and shrug it off. Well, as we all know, we must master the basics.…

This photo shows a way to make an SCBA face piece for your RIT bag/kit glove friendly. You can use a garden hose or any kind of rubber tubing or hose that would be easy to grab with a gloved hand. We used a small bungee cord and ran it through the bonnet and attached both ends to the hose. This allows for easy feeling and grabbing the back of the mask with gloved hands.…

Here is a great "memory jogger" for Command Functions and Size Up from one of our instructors, Scott Hulsey.  I know it's short, but these little cheat sheets can be used during training evolutions or at the kitchen table to stay sharp as an incident commander.

Size-up Matrix…

This is a video of a drill we do. It starts as a VES drill with the firefighter ascending the ladder and then clearing a window. The space is smoked up and the fierfighter enters, starting his search for the door. While he’s searching we throw a rug or piece of plywood ontop of them to demonstrate conditions deteriorating and making them exit fast to the window.

The intent is to force quick recognition to exit and to perform the ladder bail fast. We do this drill after evolutions of…

Check out this new blog from Frank Lipski of Engine House Training, LLC.  Visti the site and post your responses and to learn more about Engine House Training, LLC.

 …

Here are some more pictures from my A Shift buddies, Jim, Bob and Dave at Florissant Valley Fire Protection District.  These photos show the challenges of just getting into some of our buildings.  It's a lot easier to get a good look at the working mechanisms and traits of these obstacles during daylight and in non-emergent situations.

Take time to know what is behind these doors and grates.  What are they protecting and how secure are they? Is just a…

Hey, here are some pictures sent to me by a Brother who is going out the DOING the job. The whole job.  He and his crew are getting out and checking on things.  Bob gets IT and thanks for the pics.  These are in his still area and these are buildlings that get inspected and then they go right back to doing this kind of stuff.   We have to be prepared for everything and anything.  Imagine being the RIT and forcing the back door to make access for a Mayday and dealing with the mattresses?…

This past weekend we at Engine House Training, LLC had the distinct honor to interview and just talk with some of the leaders of the fire service at the 31st annual Missouri Winter Fire School. We were able to sit down with Billy Goldfeder, Dave Dodson, Forrest Reeder, Doug Cline and John Norman. To say the least, it was a great time. Click on the photo below to hear all of the podcasts. We also sat down with some of the great firefighters that attended. Challenge coins were flashed with two…

Here is a quick look at a building that offers more than one considering in regards to construction characteristics. The building in the photos is currently a resale shop. This building has been a tack shop, lawn equipment, sold boats and trailers. If you look hard at the front, it has been added onto.

The right side of the building was the original and the left was…

If you have a high rise or respond on mutual aid to a high rise district, do you know if they are marked for floor identification? If so, do you know how they corresspond with the interior labels? High rise buildings are marked differently, if at all. In our area the windows are typically marked with a reflective sticker, one on every fifth floor. Where this gets tricky is when the interior floors are labeled differently.

This high rise has red circle on the corner on the fifth floor…

This is a very simple post but one that I am finding is ever more important. Take a look at the picture and what is the first thing that you think of? What do you see? We've all done this drill or scenario and we have all at one point or another felt the anxiety of being "stuck" in a box, tube or tight spot. Some may have had instructors that guided us through and others may have been screamed at they needed to get out or they were going to die in there.

The main purpose of this post…

Here is a short video on ladder bailout. This drill must be done with a safety line in place and all students must wear all PPE. Make sure the chin straps are secure. Remember, which ever arm is your pivot arm, the one that goes under the rung, it should be on top when you get side ways. Practice and train frequently. Train with your ladders and get proficient.

As always, thanks for reading (watching) and stay safe.…

A little different look at leadership. I hope you enjoy it and have a Happy Thanksgiving.

https://www.youtube.com/watch?v=V74AxCqOTvg&feature=youtube_gdata_player

This short clip show balloon frame construction from the inside. With Engine House Training, LLC this summer, we had the opportunity to hold a class in this building. It was going to be torn down and the interior wall coverings in most of the house had been removed. That exposed the balloon frame construction characteristics that we so often speak of but seldom have the chance to see.

Use this however you like and share it.  Hopefully,…

Some training partners and I recently had the opportunity and honor to travel to rural Missouri to help with some safety and survival training. It was a one day event on a

Saturday and the department and area that we were in is staffed solely with

volunteers. We realized very quickly

that these men and women were eager and a little anxious at the same time about

this series of drills.

My background in the fire service…