SCBA Cylinder Markings

We just had 13 cylinders expire so we purchased 16 composite cylinders.We are having trouble keeping the cylinders marked with our department name and cylinder number.I was hoping to get some input on what everybody uses and what works best for them.
                                                                                                    Thanks

Views: 1742

▶ Reply to This

Replies to This Discussion

Permalink Reply by Robert on December 18, 2010 at 11:21pm
we used paint with stencils to denote or dept. We don't number the bottle's as we only have a few composite packs.
Permalink Reply by Ben Waller on December 19, 2010 at 12:02pm
Do you clear that with the cylinder manufacturer? If not, you might want to make sure that the expoxy you use won't damage the cylinder or weaken the cylinder shell over time with heat and UV exposure.
Permalink Reply by Sarah on December 19, 2010 at 12:13pm
We stick stickers with our company name on ours.

I might have missed something else that identifies them, but that is what I saw on our cylinders.
Permalink Reply by John E Badjar Sr on December 24, 2010 at 11:58am
The expoy is the same that is used by are hydro people who are the MSA guys for us
Permalink Reply by joemac on December 27, 2010 at 1:06am
Branding iron and day glo orange paint.

▶ Reply to Discussion

RSS

FireRescue Magazine

Find Members Fast


Or Name, Dept, Keyword
• Invite Your Friends
• Not a Member? Join Now

© 2024   Created by Firefighter Nation WebChief.   Powered by

Badges  |  Contact Firefighter Nation  |  Terms of Service