Cross lay load

Hey all i am wondering what type of hose load you all use and what have you found to work best for a 1 3/4 Preconnected Cross lay.. Thanks

0 members like this

▶ Reply to This

Replies to This Discussion

Permalink Reply by AssChief7 on January 4, 2009 at 12:37pm

What the hell is a Triple Lay? We use 200' minute man load. But what works best for my department may not work for your department. The key is what works best for your department.

▶ Reply

Permalink Reply by Doug on January 8, 2009 at 7:39pm

on our two engines we run minuteman with 200 feet of 1 3/4 in. one with a smooth bore and one with a fog nozzle. on one of the engine we run a flat lay attached to 2/1/2 with blitz nozzle. on the tanker we use a tripple lay 1and3/4 with a combination nozzle. and one smooth nozzle, rear preconnect is 200 ft. of 2and 1/2 flat load. all three units three and four inch are all flat loads.