Whats your preference on Pump Panel location?

We have 2 side mounts and 1 top mount. I've loved the top mount from the start. It gives you a clear 180 degree view from side to side, as well as keeps you out of the road. A few have suggested the rear mounts, but we have a good bit of highways and a 10 mile stretch of interstate in our response area, and personally behind the truck is somewhere I don't feel comfortable being on the highway.

Views: 1344

▶ Reply to This

Replies to This Discussion

Permalink Reply by Ed Jackson on August 14, 2008 at 9:36pm
We have 1 top and 1 side. I perfer the topmont. Off the road and able to see. Little bid longer wheelbase but I feel its worth it.
Permalink Reply by Wes Anders on August 16, 2008 at 10:28pm
When I started we only had side panel but we have a top mount now and if given a choice I wouldnt have anything else. Your pump operator has a much better view of whats going on and it makes communications with the operator easier.
Permalink Reply by Jamie Case on August 16, 2008 at 11:01pm
top mount all the way , easier to watch your crew and the surroundings.
Permalink Reply by Todd on August 17, 2008 at 11:42pm
It depends on what your engineers are required to do when they arrive on scene.

If you have the staffing where all the engineer has to do is tend the pump then a top mount is the way to go.

If your engineers are supposed to help pull lines, secure their own water source, hand out equipment, etc because you don't have the staffing to delegate these tasks to others, then your engineers are going to be doing an awful lot of climbing on a top mount pump.

Way back when I was an engineer I would have hated a top mount pump. Thankfully we had side-mount pumps.

Now, some have mentioned not having to deal with all the hoses, and I'm all for that. It's not just an option on top mounts, you can do that on a sidemount too. At this year's SC Firefighter's Association conference Crimson had a custom cab sidemount on display that had minimal discharges and intakes at the pump panel. If they can design one, I feel sure that other apparatus companies can and will do the same if you spec it that way.

Someone mentioned the sidemount, elevated pump panels. If I'm not mistaken that's an option that Pierce has with their PUC engines. Again, there is climbing involved, so it falls back on what are you requiring your engineers to do.
Permalink Reply by Patrick on August 18, 2008 at 12:02am
We have both Top and Side Mount Pump Panels. I would take a top mount panel over the side mount any day. Your up out of the way and you can see what's going on.
Permalink Reply by CAPNCRNCH on August 23, 2008 at 12:56am

Front mount pump, electronic valve controls on front and rear.
Permalink Reply by Bill Muehsam on August 23, 2008 at 1:30pm
Top Mounts, without a doubt. Safer for the Engineer for several reasons. Keeps you out of the traveled portion of the roadway, keeps you away from all the connections at the pump panel and allows for greater visibility of the fire scene. I wouldn't spec out an Engine Company with any but a Top mount panel.
Permalink Reply by Firefighter Tyler Supplee on August 25, 2008 at 11:34pm
yah it may increase the length with some makes.we were pricing a Crimson and they could make up for the extra length my shortening the box and making it taller.That way the tank size isn't effected.And all of them I have seen have a raised grip/drain so the heat coming off the engine melts the snow and it can drip down through.
Permalink Reply by Terry on August 25, 2008 at 11:53pm
We have 2 engines and a ladder truck and thay all have side mount pump panels. It can be a burden when yopu cant see but in the village i live in we know just about everybody and try to position the truck as to where we(pump operators) can see the fire.
Permalink Reply by Edward Maines on August 26, 2008 at 4:44pm
im a top mount guy better view at whats going on around you
Permalink Reply by Billy Lovell (Skinny) on August 26, 2008 at 4:59pm
The Trucks we have are side mount but as we replace the trucks we will be going to the top mount as long as the founds are there. As for a ladder truck I dont see the side mount as being as big a deal do to the turn table oper. being able to help the pump oper.
Permalink Reply by anne potter on August 26, 2008 at 5:23pm
Top mount can see what going on.. also tend to be a better palce when there is communication going on...

▶ Reply to Discussion

RSS

FireRescue Magazine

Find Members Fast


Or Name, Dept, Keyword
• Invite Your Friends
• Not a Member? Join Now

© 2024   Created by Firefighter Nation WebChief.   Powered by

Badges  |  Contact Firefighter Nation  |  Terms of Service