Nomex Hoods Attached to your turnout coat

Anyone have any information or tips on how to attach your Nomex Hood to your Turn-out Coat. I know alot of people are doing it and have heard of some sewing it and some pinning it on somehow. Any feedback or tips on either method would be great.

Views: 2921

▶ Reply to This

Replies to This Discussion

Permalink Reply by Fireyladd - Retired Chief Sharp on April 9, 2009 at 2:12am
Capt, never heard or see this before. Sounds interesting. At least you wont have to go looking for it if you forgot it.
Permalink Reply by Rescue601 on April 9, 2009 at 5:54pm
I wouldn't want a metal pin or velcro in direct proximity of my neck. I have to ask why you are even considering this?
Permalink Reply by Chad Furr on April 9, 2009 at 7:35pm
If you are worried about loosing it. Well then just stuff it under your helmet straps. You never forget your helmet do you?? And if you have 1 you have the other that way. In the winter I store 2 there because it gets might cold here at times. That way if 1 gets wet I always have a backp to keep my neck dry.
Permalink Reply by robert hershman on April 9, 2009 at 10:05pm
itsa fdny thing alls they do is use the snaps on the linner, so you would have to put a small holes in the hood.
Permalink Reply by Robert on April 9, 2009 at 10:11pm
never heard of this. I always have one in my helmet webbing and one in my left pant pocket as a spare for those really cold nights and if my primary gets wet.
Permalink Reply by Jake Fireman on April 10, 2009 at 12:32am
I have mine in my right boot (damnthing you are all backwards again)...and as with 'damnthing' I have never ever lost, misplaced or anything else my nomex hood. Just put it in the same place EVERYTIME and it becomes a habit. Hey maybe you can figure some fancy way for it to just roll down from your helmet...now that would be cool!
Permalink Reply by Fireyladd - Retired Chief Sharp on April 10, 2009 at 12:34am
Jake, LOL.
Permalink Reply by Ben Waller on April 10, 2009 at 12:56am
Modifying your turnout gear will probably invalidate the NFPA certification and the manufacturer's warranty. If you add a combustible item like velcro, you're asking for a burned neck.

The hoods are engineered as seperate items. Use them in the way they're designed if you want the safest gear configuration.
Permalink Reply by Ray on April 10, 2009 at 1:07am
I always put mine in between my boots grab it first and throw it on while im getting boots and pants on.....
Permalink Reply by Grant Bennett on April 10, 2009 at 4:21am
When we ordered our new gear a few years back, we had the option of having a Velcro strap installed to the coat for the Nomex. That's where I keep mine!
Permalink Reply by Bill Bryant on April 10, 2009 at 4:55am
I'm with Jake, I keep mine in might boot. I've never forgot it or lost it. After the work is over it gets pushed down around my neck until we get back to the firehouse. And then.... back into my boot.
Permalink Reply by Todd M. on April 10, 2009 at 6:54am
I myself have my nomex attached to my coat. I have Morning Pride Mfg co. attatch tabs of nomex so that I can take if off to wash it. Our liners detach from the outer shell. How I do this is simple for me because I live close to the Co. I take my coat and nomex hood to them they mark it while I have it on and then they sow the tabs on. It usually takes about 5-10 Mins for them to do this.

▶ Reply to Discussion

RSS

FireRescue Magazine

Find Members Fast


Or Name, Dept, Keyword
• Invite Your Friends
• Not a Member? Join Now

© 2024   Created by Firefighter Nation WebChief.   Powered by

Badges  |  Contact Firefighter Nation  |  Terms of Service