Hi there,

I am planning to buy a new small fire truck. I am going to use this truck in a desert climate for a small jet airway. It should be 2400ltrs water tank, and 600ltrs foam. I got some prices from some manufacturers, but i am not sure what should i be asking about other than capacities which i already asked. What other concerns should i make manufacturers aware of in regards to general body building, finishing, quality, etc..how should these tanks be belt? I need any one to help me out ordering this fire truck..i have attached photos and specs...if there's any one could suggest any thing..please do so..
my email is info@technositeyemen.com

Views: 121

Attachments:

Reply to This

Replies to This Discussion

an on deck water cannon?
1. Pump and roll capability.

2. Foam and/or dry chemical.

3. Bumper mounted turret.
yes there's a water cannon on top...i need to know your advice how can i trust an asian factory if they are going to make the fire truck exactly as in the specs i got from them. What quality issues should i be asking for? especially that it's my first time ordering a fire truck. plus i am unable to visit the factory..there's also another problem i need your advice..i have to order a Reserve tank for water and foam. the capacity will be 1500Gallon Water + foam. This reserve tank, i have no idea of how it looks or what specs should i been asking for. The fire truck will be used to put off fires in aircraft of a small landing airway in the middle of a desert..so the reserve tank is to supply and back up the small fire truck capacity. i was thinking of a trailer mounted reserve tank to be transported by a 4 x 4 truck to the site of fire in case..what do you think??
Roof mounted turret could be more useful
We use Isuzu truck in NSW. Very nice. They seem to be quite reliable and survive the Australian summer pretty well.

If a jet catches fire, 2400 litres isn't going to get you very far. I like the idea of towing around a spare tank behind a 4x4. It would be great if you could build a basic hydrant system (4" PVC pipe 6" under ground with really basic risers every 1000 or so. You're in the Yemeni desert, so it shouldn't freeze.) But that's money you may not have. If it's for firefighting only, you could leave it dry and pump dirty or salt water through it. Heck, have a pick-up truck with 1000' of supply line follow the pumper with a single guy to manage water supply.

The next problem you will have is constantly flowing foam if there is a fire. Again, I think simple trailers with foam buckets pre-positioned with a designated person to shuttle them to the fire will get you pretty far. The driver does not need to be a fire fighter, he could be a mechanic or just about anyone who is on station 24x7 and has no other job during a fire. In fact, once the water supply pick-up has laid out his hose, he could go back and start shuttling foam.

Finally you'll need to pump-and-roll. If the truck can't lay down a foam path (basically blanket your runway with foam) it is not fit to purpose. For jets, this could be a long runway. In the desert with no humidity, you'll need to lay it on heavy so it dosen't dry out.

Drop me a message. I can go on for page after page about procurement, and I love putting together a solution on a shoestring budget.

Reply to Discussion

RSS

Find Members Fast


Or Name, Dept, Keyword
Invite Your Friends
Not a Member? Join Now

© 2024   Created by Firefighter Nation WebChief.   Powered by

Badges  |  Contact Firefighter Nation  |  Terms of Service