Ive always had a Gut belt, just want to know what everyone else puts on there belt tool wise, but not to heavy though.

Views: 974

Reply to This

Replies to This Discussion

I do not wear a gut belt, but I have a different type of truck belt/reasuce harness. On my belt I carry a small bag w/ 40 ft of life safety rope with a carbiner on a figure 8 at the end. I also have another carabiner clipped to the belt as well. I usually slide the flat head axe into my belt and carry the haligan.
I have a Chicago fire issued Nylon rated Truck/Utility belt
the belt can hold up to 2000 pound.
Sewn into the front right of the belt is a triangle carabiner , attached to that I have an auto locking carabiner
then on the back right i have an O ring with my glove keeper on it also i use the O ring to slide my Pike pole
in if im sitting the peak venting , on the left i have a screw locking carabiner sewn into the belt attached with a piece of small looped nylon girth hitched holding my lantern , Thats it... my life line with a figure 8 and carabiner is in my leg pocket

Over the last few years, I've changed the set up on my belt. I now carry my rope bag with a carabiner in my left pants pocket and on my belt I have two screw locking carabiners attached @ different points. I still slide a flat head or sledge hammer into my belt to free my hands for working or carrying another tool.

Reply to Discussion


Find Members Fast

Or Name, Dept, Keyword
Invite Your Friends
Not a Member? Join Now

© 2023   Created by Firefighter Nation WebChief.   Powered by

Badges  |  Contact Firefighter Nation  |  Terms of Service