To safely store our K-12's (circular saw), and leaving room for our blower and fire extinguishers... we ended up fabricating an angled metal storage device for the rear compartment of all of our Type I Engines, which are all KME's and is shown above. We had to make our own, how do you do it?

Views: 957

Reply to This

Replies to This Discussion

Our saw, PPV, and extinguishers are all in separate compartments.

I've never heard of Halligans being banned? Or fans? WTF?

Our PPv fan , smoke ejector and water can are in our drivers side front compartment. And our saws K12 and vent saw is stored in the drivers side rear compartment( these saws are mounted on a slide out tray).

C.B we store our blower the the same way as yours except the saw is stored in an adjacent compartment. The saw is in a large metal box along with gas,spare blades and tools. In it's place in the blower compartment we keep two foam/water extinguishers,plus a gas canister. Two purple k extinguishers are stored exactly like yours.

This picture is before we had any equipment on our new engine, it is looking into the rear compartment from the drivers side. We have a 20lb. dry chem and a 2 1/2 water extinguisher mounted up against the front wall of the compartment. Our vent saw is mounted on the floor next to the extinguishers. The PPV fan is on the other side at the front wall of the rear compartment. Our Smoke Ejectors are mounted in our 2nd due engine.

Reply to Discussion

RSS

FireRescue Magazine

Find Members Fast


Or Name, Dept, Keyword
Invite Your Friends
Not a Member? Join Now

© 2017   Created by Firefighter Nation WebChief.   Powered by

Badges  |  Contact Firefighter Nation  |  Terms of Service